Usage and Introduction: This device is a specialized hazardous waste incinerator for treating liquid waste. It utilizes high-temperature pyrolysis at 850-1100 ℃ to fully decompose organic compounds and harmful compounds containing chlorine, benzene, and phenols in the waste liquid. It is particularly suitable for high concentration organic waste liquid and is widely used in industries such as shipbuilding, chemical industry, pharmaceuticals, printing and dyeing, papermaking, electronics, etc. In the production process of chemical enterprises, a large amount of organic wastewater and waste liquid are generated, most of which can be treated with conventional biochemical or physicochemical methods. However, there are still some high concentration wastewater and waste liquid that cannot be treated with conventional biochemical or physicochemical methods due to their high organic concentration. Additionally, some high concentration wastewater and waste liquid contain fluorine, inorganic salts, etc. Traditional water treatment methods are powerless to handle this, At this point, our company's wastewater and waste liquid incinerator is undergoing treatment.
Processing scale and scope of application:
    ☆ Processing capacity: 50-5000kg/h
    ☆ Treatment method: low-temperature pyrolysis, high-temperature oxidation
    ☆ Scope of application: chemical waste liquid, non combustible high concentration wastewater, waste acid, waste alkali, combustible waste oil, waste solvent, non PCB and various high salinity wastewater, etc.
Process characteristics:
    ☆Design different furnace types and temperature control methods based on the composition of wastewater.
    ☆ Different atomization nozzles and methods are adopted for the characteristics of organic waste liquid.
    ☆According to the characteristics of different organic waste liquids, different refractory materials are selected to ensure the service life of the equipment.
    ☆While treating wastewater, it can also treat organic waste gas and solid waste.
    ☆ Equipped with a function that prevents ignition without excluding explosive gases before startup to prevent gas explosion.
    ☆The furnace is equipped with a flame detector, which automatically cuts off the waste liquid and fuel supply in case of flameout or ignition failure in the furnace.
    ☆The alarm system is complete, safe and reliable.
    ☆The furnace body adopts a tangential atomization device - an internal mixed dual fluid atomizer nozzle.
    ☆Its mixing degree, atomization effect, combustion speed and efficiency are extremely high, and the excess air coefficient is low, which can save a lot of fuel.
    ☆The atomizing nozzle has a large diameter, low requirements for fluid viscosity and impurity content, and is not easy to block. Low pressure spray is used, which is not easy to wear, not easy to malfunction, and has good combustion effect.
    ☆Design different furnace temperature control methods based on the salt content in the wastewater to ensure that inorganic salts do not hang on walls or melt in the furnace during incineration, and do not float out with the flue gas.
    ☆Treat the powder and acidic gases generated during the dream burning process in the most economical and reasonable way, fully ensuring that the wastewater dream burning will not produce secondary pollution.
    ☆ Consider the utilization of waste heat after incineration of waste liquid.
    ☆Adopting advanced PLC control system, easy operation, convenient maintenance, and safe operation.